Overview
MARS355 is fan less box PC based on Intel® Celeron® processor, Bay Trail J1900, TDP 10W CPU. It comes with one DDR3L DIMM socket up to 4GB DDR3L 1333 with Non-ECC support and integrated HD Graphic controller. MARS355 operates temperature range from 0°C to 50°C. This fan less box is aimed at embedded applications for outdoor or semi-outdoor environment. Such as industrial automation, CNC machine, Robot, AI, Machine Vision applications…etc.
Specifications
CPU / Chipset
|
|
|
Main Memory
|
|
|
BIOS
|
|
|
Display
|
|
|
System
|
- FPGA:
Use TI XIO2001 PCIe to PCI bridge Use LATTICE LCMXO2-1200UHC FPGA 1 x Encoder 8 x D/I, 4x D/O 1x Watchdog Timer Alert IRQ exclusive D 0~D15, D/I 0~7, D/O 0~7 Use Everspin MR256A08BYS35 NVRAM
- COM3: for touchscreen controller, PenMount 9000 series R/S touch controller (refer to the attached)
|
|
Storage
|
|
|
Rear I/O
|
- 2x RJ45 (vertical type connector)
- 2x USB3.0 dual stack USB (vertical type connector)
- 1x 3pin terminal block,24VDC input, connector use 2EHDVM-03P (refer to the attached)
- 1x PS2 (vertical type connector)
- 1x DB9 for COM1, RS232 (vertical type connector)
- 1x DB9 for COM2, RS232/422/485 (vertical type connector)
- 1x DB15 for VGA
- 2x 8pin terminal block for 8 D/I, 4 D/O, WDT Timer Alert (refer to the attached)
- 2x Mechatrolink (MIII)
|
|
Power Requirement
|
- 1x 3-pin terminal block for DC power input
- DC24 input ±10%
- AT/ATX power mode(by jumper setting, default AT)
- 1x 4pin +12VDC/1A output (refer to the attached)
Pin define: +12V, +12V, GND, GND
|
|
Dimensions
|
- 242.4mm X 180mm X 53.25 mm (without mounting bracket)
- 268mm X 180mm X 53.25 mm (with mounting bracket)
|
|
Environment
|
- Board level operation temperture: -10°C to 60°C
- Storage temperture: -20˚C to 85˚C
- Relative humidity:
10% to 90% (operating, non-condensing) 5% to 90% (non-operating, non-condensing)
|
|
Certifications
|
|
|
Shock
|
- IEC 60068 2-27
- Faces: 6 sides
- Duration: 11ms
- Acceleration: SSD: 50G
|
|
Vibration
|
- Non-operation (X-Y-Z): Sine vibration
Sine wave vibration test: Acceleration: 2g rms Frequency: 5 – 500 Hz Test Axis: X, Y, Z Test Time: 1 Hour per axis Total Test Time: 3 Hour
- Operation (X-Y-Z): Random vibration
Random vibration test(Operating): Accelerate: 2g rms Frequency: 5 – 500 Hz Test Axis: X, Y, Z Test Time: 1 Hour (Each axis) Total Test Time: 3 Hours
|
|